Aluminum Profile "D2" 8 ft (94") Recessed Application

SKU:
ALUMD2F-94
Availability:
Usually Ships in 24 Hours
Project Support Dotless LED fixtures
Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.

Volume discount rates

Below are the available volume discount rates for each individual item when you purchase a certain amount

Buy 10 - 24 and pay only $26.51 each
Buy 25 - 49 and pay only $25.11 each
Buy 50 - 99 and pay only $24.41 each
Buy 100 or above and pay only $23.72 each
$27.90

/ Description

Aluminum Profile "D2" is a slightly narrower version of our Aluminum Profile "D." Its compact design features a ribbed recessed edge which is popular among cabinet workers for its high versatility when recessing into wood. Aluminum Profile "D2" can be used with our DOTLESS LED Strips to create evenly diffused, flush mounted lighting. Made of anodized aluminum alloy, with excellent thermal properties, Aluminum Profile "D2" maximizes the lifetime of any LED strip by dissipating excess heat. Aluminum Profile "D2" can accommodate any LED tape up to 0.43 Inch (11mm) wide. Aluminum Profile "D2" is conveniently sold in 8ft lengths as a completed kit including a pair of end-caps and the choice of one premium polycarbonate, UV-resistant clear or frosted lens. View Spec Sheet Here!


Features


  • Popular Cabinet Lighting Solution.

  • Compact design requires under 1/2 Inch of surface depth.

  • for any discrete recessed lighting application

  • Flange conceals any rough-cuts in wood and drywall.

  • Maximizes lifetime rating of any LED strip by drawing out heat.

  • Protects LED Strips from water and damaging elements.

  • Well-stocked and ready to ship from our Miami, FL facility.

Quick Specs

Length

8ft (Actual Size 94", 96" available w/ shipping surcharge)

Width

0.63 Inch (0.86" w/ flange)

Height

0.46 Inch (0.42" Recess Depth)

Lens

Clear or Frosted

Max Light Output

Medium (4 Watts/ft)

Max Strip Width

0.44 Inch (11.2mm)


Applications

Slim, compact design allows you to easily recess Aluminum Profile "D2" in a wide variety of surfaces, including drywall. The DOTLESS lighting effect by aluminum profile "D2" makes it an excellent solution for flush linear cabinet lighting, closet lighting, and kitchen task lighting. Use aluminum profile "D2" in outdoor environments to further protect waterproof strips from direct exposure to damaging elements.


Installation

Install LED Aluminum housing "D2" by first creating a groove or cavity in the desired cabinet, drywall, or shelf.


Mounting Method #1 (Use of Adhesive)

  1. Clean mounting surface (groove) of dust and residue.

  2. Apply all purpose caulking/adhesive.

  3. Install assembled fixture.


Mounting Method #2 (Counter-Sunk Screws)

  1. Screw Aluminum housing into cavity (counter-sink screws so LED strip has flat surface to install onto.

  2. Attach LED Strips onto Aluminum housing over counter-sunk screws.


  3. Cutting

    To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.


    DOTLESS Lighting!

    To achieve dot-free evenly diffused lighting in Aluminum Profile "D2" choose from the following DOTLESS LED strips.
    12V DOTLESS White LED Strip (Most Popular!)
    24V DOTLESS White LED Strip


    Best Used with the Following GlowbackLED Products


    Extra Pair of Endcaps for Aluminum Profile D2
    Extra Lens/Diffuser for Aluminum Profile D2
    Sample of Aluminum Profile D2
    UL-Listed White LED Strips
    RGB Color Changing LED Strips
    RGBW Color Changing and White LED Strips
    Dimmable and Nondimmable Power Supplies
    Connectors
    8ft Length Recess Mount Aluminum Profile D2
    Project Support Dotless LED fixtures
    Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.
View AllClose

/Product Specs

Specifications

Make sure to review product specs before purchasing LED strip. Contact-Us for assistance with product specs, application, or installation: 1-800-679-4902 | M-F | 9AM-5PM EST | Sales@bluegateinc.com

Length 8ft (Actual Size 94", 96" available with shipping surcharge)
Width 0.63 Inch (0.86" w/ flange)
Height 0.46 Inch (0.42" Recess Depth)
Lens Clear or Frosted
Max Light Output Medium (4 Watts/ft)
Max Strip Width 0.44 Inch (11.2mm)
Spec Sheet:
short-desc-sec:

8ft | 0.63" W x 0.46" H

Mount Type:
Recess w/ Flange/Trim
Suggested MAX Wattage:
4 Watts/ft
Light Output:
Medium
MAX LED Strip Width:
10mm
Profile Width:
0.5 - 0.75 Inch
Profile Height:
0.40 - 0.75 Inch
Profile Length:
8ft
Applications:
Cabinet Lighting
Applications:
Closet Lighting
Applications:
Decorative/Accent Lighting
View AllClose

Customer Reviews

expand_less