Selecting a White LED Strip
Advancements in LED technology have given way to what was formerly impossible: a high quality source of White LED lighting. Today phosphor coating on LED's allow white LED strips to give accurate and desirable color temperatures (CCT) that have the ability to render colors well. The universal method for measuring color temperature is the CRI scale, where 100 is the best (sunlight). While CRI is mostly adequate, modern methods of measurement (CQI) can give us an even better picture of a white lights ability to render color. Our Commercial Line of LED Strips all have a CRI of over 90, for ultra high performance white LED Strips see our selection of Designer LED Strips (CRI>95, high R9-R13 values).
There are two main considerations that must be taken into account when selecting a white LED Strip:
- Brightness/Intensity (measured in lumens/foot)
- Color Temperature (measured in Kelvin)
Although the desired intensity or brightness of a light source for a space is a very subjective parameter. Experts and lighting designers have come up with some general formulas to assist users in making a decision on the type of lights to purchase fir their applications. In general, per every square foot, 15-20 lumens is desired for general lighting. The following is a breakdown of the most common applications for linear LED lighting and the agreed upon intensity (brightness) that is required to adequately light the space.
**Light Intensity can always be adjusted with a dimmer (w/ use of a dimmable LED driver). It is advisable to use brighter lights than needed in conjunction with a dimmer
|Ambient/Accent Linear LED Lighting||100-200 lumens/ft|
|Linear Cabinet LED Lighting ||150-250 lumens/ft|
|Linear Task LED Lighting ||200-400 lumens/ft |
|Linear Cove LED Lighting ||200-500 lumens/ft |
|Linear High-Output LED Lighting||400-1000 lumens/ft |
Color Temperature (CCT)
CCT or correlated color temperature is a measure (in Kelvin) of a white lights perceived color. Warmer (lower) color temperatures give off a more "yellow" light color, while higher color temperatures give off a "cooler" more blue light color. The following chart should assist you in making a selection on color temperature.
|Amber White||2200K ||Best used in: Classic, Traditional Design schemes, very soft and inviting lighting. Accents reds, yellows and oranges, can diminish blues and cooler colors. Patio Lighting, Landscape lighting, beach lighting, walk way LED linear Lighting. LED Landscape Lighting, Linear LED Outdoor Lighting, Linear Amber LED Lighting |
|Warm White||3000K||Best used in: Classic and Traditional design schemes, not as warm and "amber" as 2200K, our most poipular color temperature. LED Cabinet Lighting, LED Kitchen Lighting, LED Dining Room Lighting, Warm Linear LED Lighting|
|Natural White||4500K||Best used in: Any design scheme. Natural white is the most neutral color temperature. Accents all colors evenly. Natural Linear LED lighting, Natural White LED Strip Lighting |
|Bright White||6000K ||Best used in: Modern and contemporary design schemes. Design schemes with a lot of white and blue elements. Accents blues and greens, can diminish the appearance of reds, yellows and oranges. (Our high CRI minimizes this effect). Cool LED light strips, Cool LED Strip lighting, LED cool linear lighting |
Other Parameters to Consider
LED Strips are designed to be housed in an Aluminum Channel, Profile, Extrusion to dissipate heat (maximizes lifetime), and to protect LED strips and components from the elements. When selecting an LED strip and extrusion, channel, profile combination, the following needs to be taken into consideration:
- LED Strip Lighting Density (measured in LED's/M): The higher the density of the LED chips on the LED strip the more light is diffused on a frosted lens. For smaller LED fixtures a higher density lighting (120/M+) is needed to diffuse the lights so the fixture can be "dotless" or close to "dotless." Our LED strips range from 30/M (least dense) to 240/M (highest density).
- LED Strip Width: LED strips are available in widths from 5mm to 20mm, when building fixtures please see the specs of the Aluminum channel and the LED Strips to make sure they're compatible.
- Power Supply Selection: LED Strips need a power supply or transformer. We have them available in dimmable or nondimmable configurations. Calculate the amount of power you need, multiply that number by 1.2 and select a transformer than can power that figure (120% of the needed wattage).
Need something we don't have? Want to specify us? We have industry leading project support and customization. We manufacture lighting products to your specs!
M-F | 9AM-5PM | EST