Home > Power Supply Selection Guide

Our LED Cabinet Bars, LED Puck Lights, and 12VDC LEDBARII custom linear LED light bars all require a 12VDC LED Driver. Use the following guide to select a driver best suited to your application. For simple plug-and-play installations use our adapters. For dimmable LED lighting, use our dimmable drivers which require hardwiring to an MLV (magnetic low voltage) dimmer switch. MLV Dimmer switches are the most common type of dimmer available. These drivers come pre-configured to easily accept connectors used on our line of LED bars and cabinet lighting.


100% Plug-and-Play | 3 Lights to 1 LED Driver | 36 Watts
Easily Connect up to (3) LED Cabinet Bars, Puck Lights, or 12VDC LEDBARII to one 36 Watt Adapter. Adapter easily plugs into any standard US-wall outlet. Click here for 12V 36W Adapter with 3-Outputs

100% Plug-and-Play | 6 Lights
to 1 LED Driver | 48 Watts
Easily Connect up to (3) LED Cabinet Bars, Puck Lights, or 12VDC LEDBARII to one 48 Watt Adapter. Adapter easily plugs into any standard US-wall outlet. Click here for 12V 48W Adapter with 6-Outputs


Dimmable | 3 Lights
to 1 LED Driver | 40 Watts

Easily Connect up to (3) LED Cabinet Bars, Puck Lights, or 12VDC LEDBARII to one dimmable LED Driver. Dimmable Driver is hardwired to MLV (Magnetic Low Voltage) Dimmer Switch. Click here for 12V 40W Dimmable Driver with 3-Outputs



Dimmable | 6 Lights
to 1 LED Driver | 60 Watts

Easily Connect up to (6) LED Cabinet Bars, Puck Lights, or 12VDC LEDBARII to one dimmable LED Driver. Dimmable Driver is hardwired to MLV (Magnetic Low Voltage) Dimmer Switch. Click here for 12V 60W Dimmable Driver with 6-Outputs

Sort By:
Page of 1