Profile "S2" is a surface mounted aluminum housing for LED strips that comes with a squared lens (compare with "S1" which has a rounded lens). It features a unique track mounting system which allows you to install the profile, conceal wire, and snap it into place with no visible mounting hardware. Aluminum Profile "S2" can accommodate any high-output LED strip up to 0.66" (16.8mm) wide, and acts as a heat-sink by drawing out excess heat from your LED strips extending their lifetime. The compact and slim design of "S2" makes it an ideal solution for task, shelf, and high-output cabinet lighting applications. Create DOTLESS LED lighting in aluminum channel "S2" when you select a white lens and use one of our high-density DOTLESS LED strips. Aluminum Profile “S2” is conveniently sold in 6.5ft lengths as a completed kit including a pair of end-caps, mounting track, and one squared clear or white lens. View Spec Sheet Here!
- Unique, Compact, Squared Lens Design
- DOTLESS when used with our high-density LED strips
- Conceal wire and mounting hardware (mounting track)
- Maximizes Lifetime of LED strips by dissipating heat.
- Easy to install with included mounting track.
- Slim and compact design allows for use of high output strips with a narrow channel
- Well-Stocked and Ready to Ship from our Miami, FL facility.
6.5' (Actual Size 78")
Clear or White
Max Light Output
High (6 Watts/ft)
Max Strip Width
Aluminum profile "S2" can be surface mounted easily and conveniently with the included mounting track. Its slim and compact design allows one to achieve evenly diffused and modern high-output lighting, making it perfect for use in showrooms, retail spaces, kitchens, trade shows and any creative lighting solutions one can think of! Although intended mainly for indoor use, aluminum channels protect LED strips from the elements, making them suitable for outdoor applications giving one maximum versatility.
Install in minutes with easy mounting track. Simply screw the mounting track into your desired surface, and snap your channel into place. Thin wire can be concealed in mounting track for clean installation.
To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time.
To achieve dot-free evenly diffused lighting in Aluminum Profile "S2" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip
High Output 24V DOTLESS LED Strip
Need More Information?
Let our knowledgeable sales staff assist with your LED Strip Selection
9AM-5PM | M-F | EST