Home > Custom Made LED Panels

Custom LED Panels for Backlighting Specs & FAQ

Our LED panels are available in thickness ranging from 1/4" to 5/8" depending on the configuration. LED panels can be edge-lit on one side, two sides or four sides; our engineering team will determine the correct number of lit-edges for your LED panel project. LED panels can be manufactured in our Miami headquarters to any size, shape or requirement. LED panels are available in any color temperature CCT, color configuration (color changing RGB, color changing and white RGBW), and are available in tunable white (variable color temperature).

Contact Us Now for Your Quick LED Panel Quote!
1-800-679-4902
M-F | 9AM-5PM | EST
info@bluegateinc.com

White LED Panels


Custom white LED panels are our most popular configuration for LED backlighting. White LED panel systems are available in dimmable or non-dimmable configurations as well as standard or high-output configurations. White LED panels can be made frameless (only available in standard light output) or framed for high-output LED panel lighting.

Options available:

  • 3000K Warm White
  • 4500K Natural White
  • 6500K Bright White (Recommended)
  • Dimmable
  • Non-Dimmable (switched on and off)
  • High-Output (Framed)
  • Standard Output (Frame-less)
  • Standard Output (Frame-less)
  • Standard Output (Frame-less)

Color-changing LED Panels


Use color-changing LED panels to add some fun, dramatic and even coloring to your translucent stone or material. Custom color-changing LED panels require a frame and are 5/8" thick. They can be operated using a controller to achieve millions of different colors on your material.

Options available:

  • Color Changing RGB
  • Color Changing and White RGBW
  • Control using any of our controlling systems
  • Standard Output (Less illumination then White LED Panels)
  • Framed (no break in lighting on the front)
  • 5/8" thickness
  • Any size up to 9 ft. long (can be combined for longer runs)

Custom LED Panel Specs Comparison


Standard Output White LED Panels High Output White LED Panels Color Changing LED Panels
Input Voltage 12VDC or 24VDC 12VDC or 24VDC 12VDC or 24VDC
Power Consumption determined by size of panel
~3 Watt/foot per lit edge
determined by size of panel
~5 Watt/foot per lit edge
determined by size of panel
~4 Watt/foot per lit edge
Color Options 3000K Warm White
4500K Natural White
6500K Bright White (Recommended)
4500K Natural White
6500K Bright White (Recommended)
Color Changing RGB
Color Changing and White RGBW
Dimming MLV (Forward Phase)
0-10V Dimming
Remote, Touch Panel, Dial, DMX
MLV (Forward Phase)
0-10V Dimming
Remote, Touch Panel, Dial, DMX
Remote, Touch-Panel, Automation System, Etc.
Control Options Wall Mounted Dimmers/Switches
Remote RF
Touch Panel DMX, RF, WiFi
Smart Phone/Tablet
Wall Mounted Dimmers/Switches
Remote RF
Touch Panel DMX, RF, WiFi
Smart Phone/Tablet
RF Remote
Touch Panel DMX, RF, WiFi
Smart-Phone/Tablet
Framing Framed or Frame-less Framed Framed
Lit Edges 1, 2, or 4 (determined on a per project basis) 1, 2, or 4 (determined on a per project basis) 1, 2, or 4 (determined on a per project basis)
Thickness 1/4", 3/8", 5/8" 1/4" or 5/8" 5/8"
Mount-Types Direct Screw (counter-sunk mounting holes)
Direct Screw (counter-sunk mounting holes) Direct Screw (counter-sunk mounting holes)
Odd Shapes Yes Generally No (determined by project specs) Generally No (determined by project specs)
Maximum Length 9' (108") 9' (108") 9' (108")
Warranty 3 Year Limited Warranty 3 Year Limited Warranty 3 Year Limited Warranty
Lifetime 50,000+ Hours 50,000+ Hours 50,000+ Hours
Certifications UL Listed UL Listed UL Listed

LED Panels Installation Instructions

Frequently Asked Questions

How are LED Panels mounted?

Mounting options for LED panels depend on the type of installation. The most common way to mount LED Panels is through fabricated counter-sunk holes. The LED panels can be screwed directly into the mounting surface (e.g., substrate, wall, etc.)

Can LED Panels support the weight of my stone?

LED Panels CANNOT act as the sole support for your backlit stone. Stone can be installed directly on top of LED panels; however, the LED panels MUST be installed onto a weight-bearing surface first.

How long do LED Panels last?

LED panels are a lasting lighting solution. Inexpensive alternatives utilize cheap, inconsistent components that can fail far before the advertised lifetime. Our trusted and verified components boast industry-leading lifetimes. You can expect our LED panels to last 50,000+ hours (about 6 years if left on 24/7). Inexpensive alternatives may seem like an attractive option at first but can and often do become expensive headaches in the future.

What is the turnaround time for custom LED panels?

LED panel projects can become very complicated. Turnaround time varies from project to project. That being said, we do have industry-leading turnaround times. For more information on turnaround times for your project, contact us.

Purchase LED Panel Samples Below!

Use our LED Panel Samples to see the end result of your back lighting project. LED Panel samples are completely plug-and-play and refundable if returned within 60 days of purchase.


Sort By:
Page of 1
   
 

How do I order and what is the process?

Step 1: Request a Quote - Send us drawings and/or detailed specs. Give us an idea of the lighting aesthetic you are trying to achieve.

Step 2: Be sure to specify your desired configuration - Options include

  • Natural White (4500K)
  • Bright White (6500K)
  • Color Temperature Adjustable (CCT)
  • Color Changing (RGB)
  • Color Changing and White (RGBW)
  • For White Specify the Following: Dimmable, Non-Dimmable.
  • Specify Material Being Backlit: Stone, Veneer, Graphic, Photograph, etc.

Step 3: GlowbackLED Approves Your Quote - Once order has been processed and all relevant drawings and/or templates are received, LED panels will go into the production queue. Irregular sizes or complicated panel projects require a template to create our LED panels. Here is an example of an acceptable template:


Step 4: Production - Your custom LED backlighting panels are fabricated to your specs. LED panels are fabricated with applicable cut-outs, mounting-holes for screws or stand-offs, etc.

Step 5: LED Panel Delivery - We ship your custom LED panels to the address provided.

For more information or to request a quote Contact-Us
info@bluegateinc.com

1-800-679-4902
M-F | 9AM-5PM | EST