Aluminum Profile "P8" 8ft (94")

SKU:
ALUMP8-94
Availability:
Usually Ships in 24 Hours
Project Support Dotless LED fixtures
Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.

Volume discount rates

Below are the available volume discount rates for each individual item when you purchase a certain amount

Buy 10 - 24 and pay only $135.76 each
Buy 25 - 49 and pay only $128.61 each
Buy 50 - 99 and pay only $125.04 each
Buy 100 or above and pay only $121.47 each
$142.90

/ Description

Aluminum Profile "P8" creates an evenly diffused 3 Inch wide line of high-output linear lighting. It can either be suspended from the ceiling (using the provided suspension hardware) or surface mounted for an impressive architectural lighting solution. It has an interior width of 2.81 Inch (71.4mm) wide which can be used to install 2 rows of high-output LED strip lights. This large aluminum extrusion has the capacity to dissipate the heat generated by your high-output LED strip lighting thereby extending their lifetime. Aluminum Profile “P8” is conveniently sold in 8ft lengths as a completed kit including a pair of end-caps, suspension kit, and one premium frosted diffuser (lens). The high-output capacity makes this LED channel suited for both decorative lighting applications as well as general lighting needs for commercial spaces. View Spec Sheet Here!


Features


  • 3 Inch Wide Design creates dramatic linear lighting scenes

  • Maximizes Lifetime of LED strips by dissipating heat.

  • Suitable for General Lighting! (Use in offices, hotels, restaurants, and more!)

  • Fast and Easy Installation using suspension kit, or screwing into surface

  • Protect strips from the elements

  • Well-Stocked and Ready to Ship from our Miami, FL facility.

Quick Specs

Length

8ft (Actual Size 94", 96" available w/ shipping surcharge)

Width

2.96 Inch

Height

1.27 Inch

Lens

Frosted

Max Light Output

High (10 Watts/ft)

Max Strip Width

2.81 Inch (71.4mm) we recommend using (2) rows


Applications

Aluminum profile "P8" can be surface mounted, as well as suspended from the ceiling. It's ability to hold high-output LED tape make it a perfect solution for office spaces, retail stores, hotels and more. It is also highly adaptable with any modern home design, and can be used as the primary source of lighting in any space when properly configured.


Installation

With aluminum profile "P8", one has the option of using a suspension kit, or screwing directly into the desired surface.

Mounting Method #1 (Use of Suspension Kit)

Install in minutes with our included suspension kit. Simply screw the anchor into your desired surface, install the included aircraft cable and cut to your desired length. Before Installing the closed end-cap onto light fixture, slide cable-grip retaining screws into the rear channel of the aluminum housing. Insert End-Cap, and tighten cable-gripper onto light fixture. Aircraft cable can now be pulled into the cable-grip and adjusted to desired suspension height.

Mounting Method #2 (Screw into Surface)
Drill hole specific to your mounting screw diameter into aluminum housing. Counter-sink the hole so a flat-head screw can sit flush with the housing. Install LED Strip over screw.


Cutting

To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.


DOTLESS Lighting!

To achieve dot-free evenly diffused lighting in Aluminum Profile "P8" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip


Best Used with the Following GlowbackLED Products


Extra Suspension Mounting Kit for Aluminum Profile P8
UL-Listed White LED Strips
RGB Color Changing LED Strips
RGBW Color Changing and White LED Strips
Dimmable and Nondimmable Power Supplies
Connectors
8ft Length Suspended and Surface Mount Aluminum Profile P8
Project Support Dotless LED fixtures
Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.
View AllClose

/Product Specs

Specifications

Make sure to review product specs before purchasing LED strip. Contact-Us for assistance with product specs, application, or installation: 1-800-679-4902 | M-F | 9AM-5PM EST | Sales@bluegateinc.com

Length 8ft (Actual Size 94", 96" available with shipping surcharge)
Width 2.96 Inch
Height 1.27 Inch
Lens Frosted
Max Light Output High (10 Watts/ft)
Max Strip Width 2.81 Inch (71.4mm) we recommend using (2) rows
Spec Sheet:
short-desc-sec:

8ft | 2.80" W x 1.27" H

Mount Type:
Surface or Pendant (Suspended)
Suggested MAX Wattage:
10 Watts/ft
Light Output:
High Output
MAX LED Strip Width:
Over 20 mm
Profile Width:
2 -3 Inches
Profile Height:
1 - 2 Inches
Profile Length:
8ft
Applications:
General Lighting
Applications:
Commercial/Office Lighting
Applications:
Retail and Museum Lighting
View AllClose

Customer Reviews