A slight design modification from our Aluminum Profile "P", "PH" features the same sleek and narrow look, but has a deeper, frosted lens which provides a more prominent lighting design. Aluminum Profile "PH" is designed to be suspended mounted, but can also be surface mounted. Create dot-free suspended LED lighting when paired with our high-density DOTLESS LED strips. Aluminum extrusion “PH” can accomodate any high-output LED strip up to 0.66" (16.7mm) wide and is designed to properly dissipate their heat. "PH" is conveniently sold in 6.5ft (78") lengths as a completed kit including a pair of end-caps, mounting clips, suspension kit and one frosted lens. View Spec Sheet Here!
- NEW Design! Deeper Lens for Sleek and Narrow Pendant Mounted Linear Lighting
- Maximizes Lifetime of LED strips by dissipating heat.
- Sleek design makes this adaptable to any space and design.
- Fast and Easy Installation using suspension kit, or screwing into surface
- Protect strips from the elements
- Well-Stocked and Ready to Ship from our Miami, FL facility.
Max Light Output
High (6 Watts/ft)
Max Strip Width
Aluminum profile "PH" is designed to be suspended from the ceiling, but it can also be surface mounted by being screwed directly into your mounting surface. It's deep and narrow design make it an attractive solution for general and decorative lighting purposes in residential or commercial spaces. It is primarily designed for indoor use, but when paired with waterproof components, it can be used in outdoor applications.
With aluminum profile "PH", one has the option of using a suspension kit, or using mounting clips.
Mounting Method #1 (Use of Suspension Kit)
Install in minutes with our included suspension kit. Simply screw the anchor into your desired surface, install the included aircraft cable and cut to your desired length. Before Installing the closed end-cap onto light fixture, slide cable-grip retaining screws into the rear channel of the aluminum housing. Insert End-Cap, and tighten cable-gripper onto light fixture. Aircraft cable can now be pulled into the cable-grip and adjusted to desired suspension height.
Mounting Method #2 (Direct Screw to Surface Mounting)
Drill hole specific to your mounting screw diameter into aluminum housing. Counter-sink the hole so a flat-head screw can sit flush with the housing. Install LED Strip over screw.
To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time.
To achieve dot-free evenly diffused lighting in Aluminum Profile "PH" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip
High Output 24V DOTLESS LED Strip
Need More Information?
Let our knowledgeable sales staff assist with your LED Strip Selection
9AM-5PM | M-F | EST